NewSM48TAT4XA-RP
SM48TAT4XA-RPSM48TAT4XA-RP-FrontSM48TAT4XA-RP-Back

Managed Gigabit Ethernet PoE+ Switch
(48) 10/100/1000Base-T Ports + (4) 1G/10GBase-X SFP+ Ports

SM48TAT4XA-RP

Product Details

SKU SM48TAT4XA-RP
Description

(48) 10/100/1000Base-T ports + (4) 1G/10GBase-X SFP+ slots (empty)
(includes (1) AC power supply and 19″ rack mount brackets)

Note

These PoE products may be licensed under one or more of the patents listed at cmspatents.com.

Add to Quote

Description

This switch is a high performance managed PoE+ switch with (48) 10/100/1000 copper ports and (4) dual speed 1G/10G SFP+ slots.

Features

  • Supports Jumbo Frame up to 10240 bytes
  • Authentication – RADIUS IEEE 802.1X, TACACS+
  • Security – Support SSH/SSL
  • Port security: MAC addresses to ports
  • Port based or tagged (IEEE 802.1Q) VLAN, MAC based VLAN, Management VLAN and Private VLAN Edge
  • DHCP Server, Client, Relay
  • IEEE 1588v2 PTP (TC)
  • ACLs Support for up to 512 entries, drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, DSCP/IP precedence, TCP/IP source and destination ports, IEEE 802.1p priority, Ethernet Type / IGMP packets, TCP flag
  • LLDP (Link Layer Discovery Protocol)
  • IEEE 802.3az Energy Efficiency
  • Web Management, SNMP V1/V2c/V3, Telnet, CLI
  • Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP). Supports up to 26 groups with up to (16) ports per group.
  • Supports IGMP Snooping V1/V2/V3, up to 1024 multicast groups, GVRP, IGMP Proxy, IGMP Querier
  • MLD snooping V1/V2: deliver IPv6 multicast packages only to the required receivers
  • Supports 8 hardware queues, Strict priority and WRR. Queue assignment based on DSCP and IEEE 802.1p CoS; IPv4/IPv6 precedence/ Type of Service / DiffServ / classification and remarking ACLs; rate limiting, ingress policer, egress shaping and rate control
  • IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
  • Firmware Update, configure backup/restore through web GUI and TFTP
  • Supports IPv4/IPv6 Layer 3 static routing
  • ITU-T G.8031, G8032, loop detection

PoE Features

  • Compliant with IEEE 802.3at PoE+
  • Compliant with IEEE 802.3af PoE
  • IEEE 802.1AB LLDP-MED Configuration
  • Auto Power Reset
  • DHCP per port

Device Management System (DMS)

  • Graphical Monitoring – Topology view, Floor view, Map view
  • Traffic Monitoring
  • Troubleshooting – Network diagnostic, protection mechanism, performance and link management

 

Specifications

Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3z
IEEE 802.3x
IEEE 802.3ad
IEEE 802.1D
IEEE 802.1w
IEEE 802.1s
IEEE 802.1Q
IEEE 802.1p
IEEE 802.1ad
IEEE 802.1AB
IEEE 802.3af
IEEE 802.3at
IEEE 802.3az
IEEE 802.1X
Connectors (1) RS-232 Serial port
(48) 10/100/1000 RJ-45 ports
(4) 1G/10G SFP+ slots
Protocols CSMA/CD
Technology Store-and-forward switching architecture
MAC Address 32K MAC address table
Backplane 176 Gbps
Dimensions Width: 17.4” [442 mm]
Depth: 14.76” [375 mm]
Height: 1.73” [44 mm]
Power Input Internal Power: 100 - 240VAC
Dual hot-swappable power supplies
Redundant mode, burst mode
Power-over-Ethernet Single power supply:
Max PoE budget 820 Watts
30 Watts for (27) ports simultaneously
15.4 Watts for (48) ports simultaneously

Dual power supply:
Max PoE budget 1640 Watts
30 Watts for (48) ports simultaneously
Environment Operating: 0°C to 50°C
Humidity: 5% to 90% (non-condensing)
Weight 8.38 lbs. [3.8 kg]
Compliance Safety: UL Listed
Emissions: FCC Class A, CE Mark
Warranty Lifetime

Ordering Information

SKU Description  
SM48TAT4XA-RP

(48) 10/100/1000Base-T ports + (4) 1G/10GBase-X SFP+ slots (empty)
(includes (1) AC power supply and 19″ rack mount brackets)

Add to Quote

These PoE products may be licensed under one or more of the patents listed at cmspatents.com.

Resources