N-GXE-SC-02This image is a family photo and is not representative of every SKU

PCIe Gigabit Ethernet Fiber Network Interface Cards
1000Base-SX

N-GXE-xx-02 Series

Clear

Description

The N-GXE-xx-02 Series is a Fiber Gigabit Ethernet to PCIe bus adapter that fully complies with all IEEE 802.3z and 1000Base-SX standards. It provides up to 2000 Mbps full-duplex bandwidth capacity to support high-end servers. In addition, with advanced functions like VLAN filtering packet processing, link aggregation, smart load balancing, fail-over, and Wake-on-LAN, the adapter provides enhanced performance, flexible configuration and secure networking for users in a standard-based environment. An LED indicator on the bracket displays link status, activity and speed.

Features

  • Supports PCIe x1 bus
  • High bandwidth 1000 Mbps network speed (100/1000 Mbps with Auto-Negotiation for SFP version)
  • Supports full-duplex mode
  • Supports IEEE 802.3x and IEEE 802.3z Full-Duplex Flow Control
  • Compliant with PCIe Rev 2.1 Interface
  • IEEE 802.1Q VLAN Support
  • Link Aggregation Control Protocol (LACP)
  • Link Aggregation Smart Switch
  • Smart Load Balancing (SLB) and Failover
  • Full Wake-on-LAN Support
  • Advanced Power Management (APM) Support
  • Advanced Configuration and Power Interface (ACPI) Specification v2.0c
  • Magic Packet Wake-up enable
  • Jumbo frames support up to 9014 bytes
  • IPv4 and IPv6
  • IPv4 checksum offloading TCP/UDP
  • IPv6 support for IP/TCP and IP/UDP receive checksum offload
  • Transmit Segmentation Offloading (TSO)
  • Interrupt Handling
  • Interrupt Throttling Control
  • Legacy and Message Signaling Interrupt/Extension (MSI/MSI-X)
  • Intelligent Interrupt Generation
  • Low Latency Interrupts
  • PXE and UEFI Boot
  • RoHS Compliance
  • Standard bracket attached, low-profile bracket included
  • Supports identification of NIC when multiple cards are installed

Specifications

Standards IEEE 802.3, 2006 Edition
IEEE 802.3z
IEEE 802.3x
IEEE 802.1Q
IEEE 802.3ad
Bus Slot PCIe v2.1 x1
Status LEDs Fixed Optic Versions:
L/A
On = Communication link
Off = Link Fail
Flash = Link OK and Activity
Green = Full duplex, Yellow = Half duplex
SFP Version:
L/A
On = Communication link
Off = Link Fail
Flash = Link OK and Activity
Green = 1 Gbps; Yellow = 100 Mbps
Software Support Windows 7, 8, 8.1,10 Pro, Linux,
Windows Server 2008, 2008 R2, FreeBSD, 2012
Boot Server Support PXE and UEFI Boot
Dimensions Depth: 4.097” [104.064 mm]
Height: 2.175” [55.245 mm]
Power Requirement Fixed Optic Version:
0.87 Watts (approximately), 264 mA @ 3.3 VDC
SFP Version:
1.66 Watts (approximately), 503mA @ 3.3 VDC
Environment Operating: 0°C to 50°C
Storage: -15°C to 65°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 0.55 lbs. [0.25 kg]
Compliance EN55022 Class B, EN55024, CE Mark, ROHS
Warranty Lifetime

Ordering Information

SKU Description  
N-GXE-SC-02

1000Base-SX 850nm multimode (SC) [62.5/125 μm fiber: 220 m/722 ft.] [50/125 μm fiber: 550 m/1804 ft.] Link Budget: 8.0 dB

Add to Quote
N-GXE-LC-02

1000Base-SX 850nm multimode (LC) [62.5/125 μm fiber: 220 m/722 ft.] [50/125 μm fiber: 550 m/1804 ft.] Link Budget: 8.0 dB

Add to Quote
N-GXE-ST-02

1000Base-SX 850nm multimode (ST) [62.5/125 μm fiber: 220 m/722 ft.] [50/125 μm fiber: 550 m/1804 ft.] Link Budget: 8.0 dB

Add to Quote
N-GXE-SFP-02

*COMING SOON*
100/1000Base-X open SFP fiber port (SFP sold separately)

Add to Quote