Ethernet Media Converter – SGPAT10xx-100

PoE PSE Media Converter


SKU: N/A Product Line:

This product is currently out of stock and unavailable.

Product Description

The SGPAT10xx-100 is a 10/100/1000Base-T to 1000Base-SX/ LX Gigabit Ethernet Media Converter, which allows two different types of network segments to be connected easily and affordably while also injecting PoE+ power through the copper RJ-45 port.

PoE allows for the transmission of power over the same copper cables used to transmit data. PoE+ media converters are Power Sourcing Equipment (PSE). This AC powered media converter combines data received over a fiber optic link with 56VDC power to provide power and data to Powered Devices (PD) over unshielded twisted pair cabling while complying with IEEE 802.3at PoE+ (pre-standard) and also backwards compatible with IEEE 802.3af standard PoE.

The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection, and fault protection input. Link Pass Through and Remote Fault Detect allows the media converter to monitor both the fiber and the copper ports for the loss of a receive (RX) signal and propagate the failure on to the end devices


• Internal AC power supply
• Over-current protection
• Under-current detection
• Minimum load sensing
• Fault Protection Input
• Auto-Negotiation
• Link Pass Through
• Remote Fault Detect
• Wall mount or Tabletop installation


Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3at (pre-standard)
Data Rate 10/100/1000 Mbps
Max Packet Size 9216 Bytes in Cut-Through Mode
2048 Bytes in Normal Mode
Switch Switch 1: Cut-Through Mode (default) or
Normal Mode
Switch 2: Link Pass Through Enable (default) or
Switch 3: PoE Enable(default) or Disable
Status LEDs PWR (Power): On = Power
LNK/ACT 1: On = Copper Link, Blinking = Activity
LNK/ACT 2: On = Fiber Link, Blinking = Activity
10/100/1000: Green = Copper 1000Mbps Link
Amber = Copper 100Mbps Link
Off = Copper 10Mbps Link
PoE1: On = RJ-45 (1,2), (3,6) pairs detect PD
PoE2: On = RJ-45 (4,5), (7,8) pairs detect PD
Dimensions Width: 6.22” [158 mm]
Depth: 5.23” [133 mm]
Height: 1.57” [40 mm]
Power Consumption 30 Watts (max)
Power Input 100 – 240 VAC, 47 – 63 Hz
Environment Operating: 0°C to 40°C
Storage: -20°C to 70°C
Humidity: 5% to 90% (non-condensing)
Weight 2 lbs. [0.90 kg]
Compliance FCC Part 15 Class A, CE Mark
Warranty Lifetime

Ordering Information

SKU Description