S6210 Series
S6210 SeriesThis image is a family photo and is not representative of every SKU
S6210-SeriesS6210-3013S6210-3014S6210-3040

Stand-alone DS3-T3/E3 Network Interface Device
DS3 – T3/E3 Coax over Fiber

S6210 Series

Clear

Description

The ION S6210 is a managed stand-alone media converter that provides a solution for those users that need to extend DS3-T3/E3 connections over fiber. The S6210 is available in versions that support fixed fiber connectors as well as SFP fiber modules offering support for a variety of fiber types, distances, and wavelengths to provide maximum flexibility across a variety of network topologies. CWDM SFPs can also be utilized to further increase the bandwidth capacity of the fiber infrastructure.

The S6210 DS3-T3/E3 converters must be used in pairs. Management of the stand-alone converter is supported, in-band, over the fiber, when the remote S6210 is linked to a C6210 card installed in a managed ION chassis.

 

Features

  • AIS (Alarm Indication Signal)
  • Coax Line Build Out
  • Switch selectable for DS3/T3 or E3
  • Remote firmware upgrade
  • Loopback – Coax and Fiber
  • LEDs for immediate visual status
  • Supports dual or single fiber
  • Supports multimode and single mode fiber at a variety of distances
  • Supports CWDM SFPs
  • SNMP management when used with ION chassis and management module
  • Remote stand-alone can be managed by local chassis card
  • Must be used in pairs

Specifications

Standards ANSI
ITU-TS
ETSI
G.823 for jitter tolerance
G.755 for loss of signal
Connectors Coax Connectors 75 ohm coax
Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
SFP Fixed Optics: ST or SC connector
Data Rate DS3/T3 = 44.7 Mbps; E3 = 34.4 Mbps
Status LEDs Power, Coax link status, coax loopback status, AIS
on coax link; Fiber link status, fiber loopback
status, AIS on fiber link
Dimensions Width: 3.5” [82 mm]
Depth: 6.5” [165 mm]
Height: 1" [25 mm]
Power Consumption 2.4 Watts
Power Input 100-240 VAC
Power Output 12 VDC
Environment Operating: -10°C to +65°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 2 lbs. [0.90 kg]
MTBF With Power Supply:
Greater than 41,660 hours (MIL-HDBD-217F)
Greater than 114,580 hours (Bellcore)

Without Power Supply:
Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)
Certifications CISPR/EN55022 Class A, FCC Class A, CE Mark, UL60950
Warranty Lifetime

Ordering Information

SKU Description  
S6210-3013 S6210-3013

(2) Coax (BNC) to 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB

Add to Quote
S6210-3014 S6210-3014

(2) Coax (BNC) to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB

Add to Quote
S6210-3040 S6210-3040

(2) Coax (BNC) to *SFP slot (empty)

Add to Quote

*SFP port uses standard 100Base-x/oc-3 SFP

Resources