Unmanaged IP Over 2-Wire Ethernet Extender
(1) 100Base-TX RJ-45 Port + (1) 2-Wire Terminal Block
Transition Networks IP Over 2-Wire Ethernet Extender provides the ability to leverage existing 2-Wire cable infrastructure to extend the Ethernet network to remote locations, such as light poles or traffic signal poles. The extenders are a cost-effective alternative to running new Cat5/6 cable and reducing implementation time.
These extenders are used as a pair of devices, with a local and remote device at opposite ends of the 2-Wire cable. The local and remote devices can each accept a 100Base-TX RJ-45 connection. The local and remote devices can communicate over non-UTP 24AWG wire lengths of up to 200M. The wide input power range allows the extenders to work with a variety of power sources to suit specific applications.
- Store-and-Forward Processing
- Extend Ethernet distances up to 200m on 24AWG 2-Wire Cable
- IP30 Enclosure
- Single unit is user-selectable as Master or Slave
- 12~48 Power Input
- DIN Rail/Wall Mountable
- Eliminates cost of running CAT5/6 Cable
|Status LEDs||Power, RJ-45 Link, 2-Wire Link|
|Dimensions|| Width: 0.9” [23 mm]
Depth: 2.75" [70 mm]
Height: 3.74” [95 mm]
|Power Consumption||2 Watts|
|Power Input||12 - 48 VDC|
|Fault Relay||1A at 24 VDC capacity|
|Environment||Operating: -40°C to +70°C
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
|Weight||0.53 lbs. [0.24 kg]|
|Compliance||Safety: EN60950-1, FCC Part 15,
CISPR22/EN55022 Class A,
Immunity: EN61000-4-2, EN61000-4-3,
EN-61000-4-4, EN61000- 4-5, EN61000-4-6,
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
NOTE: Products must be used in pairs
Optional Power Supply 25135 for use when required 12-48 VDC power is not available.
I have been specifically using Transition Networks’ products on my engineering products for over 10 years. I have always been pleased with their products, their support, and their willingness to listen to requests for new product development.