Fast Ethernet Class A Media Converter

CFETF10xx-110

Clear

Features

  • Round trip delay of only 40 bit times, far below the Class II rating of 92 bit times
  • Auto-Negotiation
  • Auto-MDI/MDIX
  • Link Pass Through
  • Automatic Link Restoration
  • Field Upgradeable Firmware
  • Can be used with any Point System™ Chassis

Specifications

Standards IEEE 802.3
Data Rate 100 Mbps
4-Position Switch 1. Auto-Negotiation (UP = enabled): Allows
detection of, and adaptation to, full-duplex or halfduplex
mode in device attached to copper link
2. Link Pass Through (UP = enabled): Allows a
fault EITHER on the copper OR on the fiber side of
the media converter to stop signal and
data transmission on the other side
3. AutoCross™ (UP = enabled): Allows straightthrough
twisted pair cable to be used for crossover
connections
4. Not Used
3-Position Jumper Hardware: Converter mode is determined by
4-position switch settings
Software: Converter mode is determined by most
recently saved on-board microprocessor settings
Status LEDs Power: Indicates that DC power is connected
TX (Link Copper): ON indicates TP link; Blinking
indicates TP receive;
FX (Link Fiber): ON indicates fiber link; Blinking
indicates Fiber receive
Dimensions Width: 0.86” [22 mm]
Depth: 5.0” [127 mm]
Height: 3.4” [86 mm]
Power Consumption 2.5 Watts
Environment Environment specs are dependent on the chassis chosen
Operating: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 1 lb. [0.45 kg]
Compliance CE Mark, FCC Class A; CISPR Class A
Warranty Lifetime

Ordering Information

SKU Description  
CFETF1011-110

100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB

Add to Quote
CFETF1013-110

100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm MM (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB

Add to Quote
CFETF1014-110

100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB

Add to Quote
CFETF1040-110

100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-X SFP slot (empty)

Add to Quote
CFETF1029-110

100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB

Add to Quote
CFETF1029-111

100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB

Add to Quote

FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A) and Europe (CISPR Class A). FCC & CISPR Class B devices comply with radiated emissions standards for residential applications in the United States (FCC Class B) and Europe (CISPR Class B).

Resources