CCSCF30xx-11x

DS3-T3/E3 and STS-1 Coax to Fiber NID

CCSCF30xx-11x

SKU: N/A Product Line:
Clear

Product Description

The CCSCF family of chassis card DS3 – T3/E3 & STS-1 copper to fiber Network Interface Devices (NIDs) provide a solution for those users that need to extend DS3 connections over fiber. The CCSCF supports Small Form Factor Pluggable (SFP) transceivers to support a variety of fiber types, distances and wavelengths to provide maximum flexibility across a variety of network topologies. The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to further increase the bandwidth capacity of the fiber infrastructure.

The CCSCF DS3 – T3/E3 & STS-1 NID must be used in pairs. A typical installation will include a chassis card installed in the Point System™ locally and a stand-alone device [SCSCF] installed at the remote location.

Features

  • AIS (Alarm Indication Signal)
  • Coax Line Build Out
  • Switch selectable for DS3/T3 or E3
  • Loopback – Coax and Fiber
  • LEDs for immediate visual status
  • Supports dual or single fiber
  • Supports multimode and single mode fiber at a variety of distances
  • Supports CWDM SFPs
  • SNMP management when used with Point System™ chassis and management module
  • Field Upgradeable Firmware when used with Point System™ Chassis and management module

Specifications

Standards ANSI
ITU-TS
ETSI
AT&T
G.703
G.921
G.955
Connectors Coax Connectors: 75 ohm coax: TX output: min: +2.5 dBm, max: +9.1 dBm;
RX input: min: -9.7dBm, max: +10.5 dBm
Fiber Connectors SFP: LC connector Uses standard 100BASE-X/OC-3 SFP
Data Rate DS3/T3 = 44.7 Mbps; E3 = 34.4 Mbps;
STS-1 = 51.8 Mbps
Status LEDs Power, Coax link status, coax loop-back status, AIS
on coax link; Fiber link status, fiber
loop-back status, AIS on fiber link
Dimensions Width: 0.87” [22 mm]
Depth: 5.0” [127 mm]
Height: 3.4” [86 mm]
Power Consumption 3.0 Watts
Environment Environment specs are dependent on the chassis chosen
Operating: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 1 lb. [0.45 kg]
MTBF Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)
Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty Lifetime

Ordering Information

SKU Description  
*CCSCF3011-110

(2) Coax (BNC)
to 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 14.0 dB

Add to Quote
CCSCF3013-110

(2) Coax (BNC)
to 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 14.0 dB

Add to Quote
CCSCF3014-110

(2) Coax (BNC)
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB

Add to Quote
CCSCF3029-110

(2) Coax (BNC)
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB

Add to Quote
CCSCF3029-111

(2) Coax (BNC)
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB

Add to Quote
CCSCF3040-110

(2) Coax (BNC) to SFP slot (empty)

Add to Quote

*Product is build to order