ION Fiber to Fiber Media Converter Module – C4110

ION Fiber to Fiber Media Converter Module
SFP+ to SFP+ for Data Rates from 1 Gbps to 11.5 Gbps

C4110-4848

Product Details

SKU C4110-4848
Description

1 Gbps to 11.5 Gbps fiber repeater with two open SFP+ slots, any-rate to same-rate ION slide-in card media converter

Description

The C4110 is a fiber to fiber media converter module. It is protocol independent and supports data rates from 1Gbps to 11.5Gbps through two open SFP+ ports. This allows network managers to customize the C4110 with a pair of SFP+ modules to meet their network requirements. The open SFP+ port supports a wide variety of Transition Networks 10Gbps SFP+ fiber modules. This any-rate to same-rate converter can be used to perform reliable and cost-effective single mode to multimode conversion or it can be used to provide wavelength conversion in CWDM applications. The ION C4110 is a manageable device when installed in a managed ION chassis.

Features

  • Fiber to fiber repeater
  • Remotely Managed when installed in a Managed ION Chassis
  • Supports data rates from 1Gbps to 11.5Gbps
  • Support Any-rate to Same-rate
  • Protocol Transparent supports:
    • Ethernet: 10Gig LAN, 10Gig Wan, 1Gig LAN
    • Fiber Channel: 10, 8, 4, 2, 1Gig
    • SONET/SDN OC-192, OC-48
  • SFP to SFP or SFP+ to SFP+
  • Provides conversion between different types of fiber
  • Supported transmission distance based on the SFP modules and type of fiber used
  • Supports 3R (Reamplify, Reshape, and Retime) signal regeneration
  • No frame size limitations
  • Use as a fiber mode converter
  • Use as a specific wavelength CWDM Transponder
  • Also available as a stand-alone converter: S4110-4848

Specifications

Standards IEEE 802.3ae
ITU.G.709
SFF8431
Multi-sourcing Agreement (MSA)
Small Form Factor Pluggable (SFP)
Ports PWR On = Power
Port 1 Link/Act: On = Link, Flashing = Network Traffic
Port 2 Link/Act: On = Link, Flashing = Network Traffic
Data Rate Protocol Independent, 1 Gbps to 11.5 Gbps
Dip Switch Only 4 of the 8 Dip Switches are used to select the
operational data rate, see the user guide for the
supported dip switch configurations
Dimensions Width: 0.86” [22 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86 mm]
Power Consumption 4.2 Watts
Environment Environment specs are dependent on the chassis chosen
Operating: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 1 lb. [0.45 kg]
MTBF Greater than 250,000 hours (MIL-HDBK-217F)
Greater than 687,000 hours (Bellcore)
Compliance FCC Class A, CE Mark, EN55022 Class A, EN55024
Warranty Lifetime

Ordering Information

SKU Description  
C4110-4848

1 Gbps to 11.5 Gbps fiber repeater with two open SFP+ slots, any-rate to same-rate ION slide-in card media converter

Add to Quote

Resources