Industrial Power Supply – 25148

Industrial Power Supply, 90 ~ 264 VAC; 127 ~ 370 VDC

25148

SKU: 25148 Datasheet: 25148 Datasheet (228.47 KB) Product Line:

Product Details

SKU 25148
Description

90 ~ 264 VAC; 127 ~ 370 VDC

Features

  • Universal AC input/full range
  • 3 pole AC inlet IEC320-C14
  • Built-in active power factor controller function
  • Industrial (-30°C to +70°C) operating temperature
  • No load power consumption ≤0.15 Watts
  • Energy efficiency Level VI
  • Compliant with EIASA 2007/DoE, NRCan, AU/NZ MEPS, EU ErP and CoC Version 5
  • Class 1 power (with earth pin)
  • Short circuit/overload/over voltage/over temperature protection
  • Fully enclosed 94V-0 flame retardant plastic case
  • LED power on indicator

Specifications

Connector 4-pin DIN plug (see plug assignment)
Cable UL1185 16AWG
Output Voltage 48V (Output voltage set at point measure by plug terminal +50% load)
Rated Current 1.87A
Current Range 0-1.87A
Rated Power 90W (max)
Ripple & Noise 240mVp-p (max) (Measured at 20MHz by using a 12” twisted pair terminated with a 0.1uf &47uf capacitor)
Voltage Tolerance ±2.5% (Includes set up tolerance, line regulation, load regulation)
Line Regulation ±1.0% (Line regulation is measured from low line to high line at rated load)
Load Regulation ±2.5%
Setup, Rise Time 1000ms, 50ms/230VAC; 1000ms, 50ms/115VAC at full load (Length of setup time is measured at first cost start. Turning ON/OFF the power supply may lead to increase of the setup time)
Hold Up Time 20ms/230VAC typ; 20ms/115VAC at full load typical
Input Voltage 90-264VAC, 127-370VDC (Derating may be needed under low input voltages. Check the derating curve for more details.)
Input Frequency Range 47-63 Hz
Power Factor PF>0.91/230VAC typical; PF>0/95/115VAC at full load typical
Efficiency 91% typical
AC Current 1.3A/115VAC typical; 0.6A/230VAC typical
Inrush Current 70A/230VAC (max)
Leakage Current 1mA/240VAC (max)
Withstand Voltage I/P-O/P: 3KVAC, I/P-FG: 2KVAC. O/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M
Ohms/500VDC/25°C/70%RH
Protection Overload: 110-150% rated output power (Hiccup mode, recovers automatically after fault condition is removed)
Overvoltage: 105-135% rated output voltage (Shut down o/p voltage, re-power on to recover)
Over Temperature: Shut down o/p voltage, re-power on to recover
Dimensions Width: 5.71” [145 mm]
Depth: 2.36” [60 mm]
Height: 1.26” [32 mm]
Environment Operating: -30°C to +70°C (See derating curve)
Storage: -40°C to +85°C
Humidity: 20% to 90% (non-condensing)
Weight 0.99 lbs. [0.45 kg]
MTBF 348.7K hours min MIL-HDBK-217F (25°C)
Vibration 10-500Hz, 2G 10min/1 cycle period for 60 min each
along X,Y,Z axes
Compliance Safety: UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS 14336, CCC Gb4943, PSE J60950-1, AS/NZS 60950.1 approved
Emmisions: EN55022 class B, EN61000-3-2,3, FCC Part 15/CISPR22 class B, CNS13438 class B, GB9254, GB17625.1
Immunity: EN61000-4-2,3,4,5,6,8,11 light industry level, criteria A

Ordering Information

SKU Description  
25148

90 ~ 264 VAC; 127 ~ 370 VDC

Add to Quote

Resources