Media Conversion, Switching and Data Networking by Transition Networks

RS232 Copper to Fiber with Remote Management
Stand-Alone Media Converters

Transition Networks's serial RS232 to Fiber Media Converter allows you to extend the distance between serial connections with the use of fiber optic cable. This full-featured converter transmits the full complement of RS232 flow control/handshaking signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115Kb/s.

The diagnostic features included on this converter make installation easy and intuitive. A DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to system turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.

In addition to status LEDs and switch settings for local management, these converters can also be managed from remote locations when used in conjunction with a managed Point System™ chassis.

Data Sheet [PDF]

Installation Manual [PDF]

Features

Applications

Specifications

Accessories

Ordering Information

Standards	EIA/TIA-574, EIA/TIA RS-232E
Data Rate	115 Kb/s
Fiber Optic Connector Specs
Multimode
SRS2F3111-100	Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.00 dB
SRS2F3113-100	Min TX PWR: -19.0 dBm Max TX PWR: -14.0 dBm RX Sensitivity: -30.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.00 dB
Single Mode
SRS2F3114-100	Min TX PWR: -15.0 dBm Max TX PWR: -8.0 dBm RX Sensitivity: -31.0 dBm Max In PWR: -8.0 dBm Link Budget: 16.00 dB
SRS2F3115-100	Min TX PWR: -8.0 dBm Max TX PWR: -2.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -7.0 dBm Link Budget: 26.00 dB
Switches	DTE/DCE: Select appropriate position Loop-back: Norm = normal operation; Loop = Fiber and copper loop-back
Status LEDs	P (Power) Lit for normal operation RX Steady = Copper Link; Flashing = Rx Data FL Steady = Fiber Link; Flashing = Loop back mode
Dimensions	Width: 3.3" [84 mm] Depth: 4.8" [122 mm] Height: 1.2" [30 mm]
Power	External AC/DC; 12VDC, 0.5 A min
Power Consumption	5.0 watts
Environment	0 – 50°C; 5% – 95% humidity (non-condensing); 0 – 10,000 feet altitude
Shipping Weight	2 lbs. [0.90 kg]
Safety Compliance	Wall Mount Power Supply: UL listed and CSA certified
Regulatory Compliance	FCC Class A, CISPR/EN55022 Class A, EN55024, EN60950, CE Mark
Warranty	Lifetime

RS232 Copper to Fiber with Remote Management Stand-Alone Media Converters