|
Standards
|
IEEE Std. 802.3, 802.1p,802.1Q,
802.3u, 802.1d, 802.1w, 802.3x
| |
Fiber Optic Connector Specs
| | Multimode | Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.00 dB | | Single Mode | Min TX PWR: -15.0 dBm
Max TX PWR: -8.0 dBm
RX Sensitivity: -32.0 dBm
Max In PWR: -5.0 dBm
Link Budget: 17.00 dB | |
Status LEDs
|
PWR (Power): ON = power connected
R.M.: ON = Device is the Master in the
redundant ring network
PWR 1 (Power): ON = primary power
connected
PWR 2 (Power): ON = backup power
connected
Fault: ON = Fault on port link or loss of PWR
1 or PWR 2
LNK/ACT (Fiber): ON = Link on fiber
100Mb/s; Flashing = data transmitting
FDX/COL (Fiber): ON = Full duplex link on
fiber; Flashing = collisions occuring
| |
Data Transfer Rate
|
10BASE-T: 14,880 pps
100BASE-TX: 148,800 pps
| |
MAC Addresses
|
2K
| |
Max Packet Size
|
1536 bytes
| |
Data Memory Buffer
|
1Mb
| |
Backplane
|
2.0 Gbps
| |
SNMP MIB
|
RFC 1213 MIBII, RFC 1493 Bridge MIB,RMON RFC 1757, RFC 2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC 1215 Trap MIB
| |
Dimensions
|
Width: 2.1" [54 mm]
Depth: 4.1" [105 mm]
Height: 5.3" [135 mm]
| |
Ingress Protection
|
IP 31
| |
Input Power
|
12 to 48 VDC, 0.2A, redundant inputs with reverse polarity protection; Additional barrel connector cable
| |
Power Consumption
|
-180 Models: 4.6 watts
-162 Models: 6.0 watts
| |
Environment
|
0 to +60°C Std. operating temp.
-40 to +75°C Ext. operating temp.
-40 to +85°C storage temp.
5 – 95% humidity non-condensing
0 – 10,000 feet altitude
| |
Shipping Weight
|
2 lbs. [0.90 kg]
| |
Safety Compliance
|
UL 60950; cUL60950
| |
EMI Compliance
|
CISPR22/EN55022; EN60950 Class A; FCC Class A; CE Mark; EN61000-4-2; EN61000-4-3; EN61000-4-4; EN61000-4-5; EN61000-4-6
| |
Environmental Compliance
|
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
| |
Warranty
|
Lifetime
|  | |
|
